MIR-554 Cooled Incubator
MIR-554 Cooled Incubator PHCBi Cooled Incubator Laboratory Incubator Malaysia, Selangor, Kuala Lumpur (KL), Puchong Supplier, Distributor, Supply, Supplies | SCIMED TECHNOLOGIES SDN BHD
All-round performance

The MIR-554 Cooled Incubator with a capacity 406 liters of is recognized as an exceptional unit suitable for a wide range of applications requiring a -10ºC to +60ºC environment. The wide variety of temperature and lighting patterns that are essential in research, environmental studies and testing can now be accurately reproduced and controlled.

External Dimensions (W x D x H) 800 x 832 x 1810 mm
Internal Dimensions (W x D x H) 640 x 550 x 1160 mm
Volume 406 litres
Net Weight 195 kg
Temperature Control Range -10°C ~ +60°C (AT +5°C ~ +35°C, no load)
Temperature Fluctuation ±0.2 with Heater PID control (SV 50°C, Ambient Temp 20°C, No load), ±1.5 with Compressor control (SV 5°C, Ambient Temp 20°C, No load)
Temperature Uniformity ±0.5 (SV 37°C, Ambient Temp 20°C, No load)
Controller Microprocessor PID System (ON-OFF control when compressor operates)
Display LCD
Temperature Sensor Thermistor
Cooling Method Forced air circulation
Compressors 250 W
Refrigerant R-404A
Insulation Material PUF
Insulation Thickness 80 mm
Exterior Material Painted steel
Interior Material SS SUS-304
Outer Doors Painted steel
Outer Door Lock  
Reversible Door  
Inner Doors  
Shelves Polyethylene coated steel wire, adjustable x 5
Max. Load Per Shelf 50 kg
Max. Total Load 250 kg
Access Port 2
Access Port Position left and right side
Access Port Diameter 40 mm
Interior Fluorescent Lamp 1, 15 W, with MIR-L152 option
Power Failure -
High Temperature V-B-R
Low Temperature V-B-R
Door Open V-B
Power Supply 220 V - 240 V
Frequency 50 Hz (CE)
Noise Level 45 dB [A]



Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version